YAMAHA NS10M Studio • Studio Monitors • Made in Japan
Pre-owned
£265.00
SOLD!
One of the original tweeters has been replaced as seen in pic, but both speakers work perfectly and sound excellent.
Key Specifications (Common NS-10M/Studio Models
Type: 2-way acoustic suspension (sealed) bookshelf speaker
- Woofer: 18 cm (7-inch) white paper cone
- Tweeter: 3.5 cm (1.4-inch) soft dome
- Frequency Response: 60 Hz to 20 kHz
- Power Capacity: 60W (Program) / 120W (Max)
- Sensitivity: 90 dB SPL (1W, 1m)
- Impedance: 8 ohms
- Crossover Frequency: 2 kHz (12 dB/octave)
- Dimensions:382×215×198mm
382×215×198mm
AUDIO-TECHNICA AT-PEQ3 PHONO EQUALISER
Pre-owned
£79.00
• Selectable MM and MC input with fixed gain and impedance
• High-quality FET inputs ensure a low noise signal when incorporated with a negative feedback-type phono equaliser circuit
• Precision components provide an excellent RIAA response for best-in-class performance
• All metal construction enclosure provides superior isolation from radio and electronic noise interference
• Machined aluminium front panel and gold-plated input/output RCA connectors are examples of the high-grade material used throughout
BEYMA 10G40 – 10″ 300W 8 Ohm – Single Loudspeaker
Unsealed box, never used
£100.00
TECHNICAL SPECIFICATIONS:
Nominal diameter 250 mm 10 in
Nominal impedance 8 ohm
Minimum impedance 6.6 ohm @ 5.3 kHz
Power capacity 400 W AES
Program power 800 W
Sensitivity 95 dB 1 W @ 1m @ 2Π
Frequency range 45-4000 Hz
Recommended enclosure volume 20 / 70 l 0.7 / 2.6 cu ft
Voice coil diameter 77 mm 3 in
BL factor 17 N / A
Moving mass 0.052 kg
Winding length 17.5 mm
Air gap height 7 mm
Xdamage pp 28 mm
BEYMA 10G40 – 10″ 300W 8 Ohm Loudspeaker (Pair)
Unsealed box, never used
£190.00
TECHNICAL SPECIFICATIONS:
Nominal diameter 250 mm 10 in
Nominal impedance 8 ohm
Minimum impedance 6.6 ohm @ 5.3 kHz
Power capacity 400 W AES
Program power 800 W
Sensitivity 95 dB 1 W @ 1m @ 2Π
Frequency range 45-4000 Hz
Recommended enclosure volume 20 / 70 l 0.7 / 2.6 cu ft
Voice coil diameter 77 mm 3 in
BL factor 17 N / A
Moving mass 0.052 kg
Winding length 17.5 mm
Air gap height 7 mm
Xdamage pp 28 mm
ADASTRA RM60D • MIXER AMPLIFIER
Pre-owned
£150.00
The Adastra RM60D Mixer-Amplifier is a rack-mountable mixer-amplifier, tailored to commercial sound installations to power 100V line speakers or standard speakers down to a 4 Ohm load. Input options include XLR (with switchable phantom power), mic/line jack, and RCA line. Features an inbuilt DAB+/FM radio tuner, front-mounted SD/USB ports, and Bluetooth connectivity, all controlled via an integrated media player for hassle-free playback. A switchable ‘voiceover’ feature automatically lowers the background music volume when a signal is detected via mic input 1, and rear panel 24V contacts can mute all except mic input 1 when triggered. Outputs on screw terminla are via 4 switchable zones with a separate “always on” output for priority alert speakers.
VARICURVE FCS-926 • DUAL EQUALISER ANALYSER
Pre-owned
£140.00
The FCS-926 combines a digital-controlled analogue parametric filter set with intuitive assignable controls, fully interactive graphic display and intelligent spectrum analyser, plus MIDI control.
The FCS-920 is a 1U client module with the same EQ processing facilities as the FCS-926 but with no front panel controls.
VARICURVE’s multiband parametric equalisation creates a more accurate and sonically superior EQ contour than conventional manual or programmable graphic equalisers, and is equally at
home on Front-of-House, Monitor, or Studio Equalisation.
Each unit offers two channels of 6 band parametric EQ, or can be set to a mono 12 band equaliser. Any filter may be set to one of 212 frequencies, with a cut/boost of +/-15dB, or notch of 30dB, and a variable filter bandwidth of 0.1 to 2 octaves.
An integral spectrum analyser provides a fast method of measuring room response and automatically determining the correct EQ curve (as a first approximation).
FADERFOX MX12 MIDI CONTROLLER
Pre-owned
£450.00
MX12, successor of the UC44, is a universal controller for all kinds of MIDI controllable hard- and software.
You can combine NEW MODULE devices to a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.
Furthermore there are 4 Midi-ports and one USB-port with various routing possibilities.
You can use the mix controller also with your DAW like a classic 12-track-mixer.
The device has 24 standard pots, 12 Faders and 24 buttons in a 12-track-layout, Various kinds of midi commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every MIDI command for every separate control on the device very fast and easily.
You can assign the pots and keys to any of these commands by learning incoming MIDI commands. The pots work with standard resolution of 7-bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.
FOCUSRITE CLARETT 8PreX • Audio Interface
Pre-owned
£499.00
The Focusrite Clarett 8Pre X is a 26-in/28-out Thunderbolt audio interface (2U rackmount) designed for professional studios, featuring 8 “Air”-enabled mic preamps, 24-bit/192kHz conversion, and sub-1ms round-trip latency. It offers dedicated rear-panel XLR/TRS inputs for mics and line signals, extensive ADAT expansion, and comprehensive front-panel monitoring.
Key Specifications
Connectivity: Thunderbolt (includes Windows support).
Simultaneous I/O: 26 In / 28 Out.
A/D/A Resolution: Up to 24-bit/192 kHz.
Preamps: 8 x Clarett Mic Pres with switchable ‘Air’ mode.
Dynamic Range: 116 dB (A/D), 118 dB (D/A) or 119dB for line outputs.
Phantom Power: +48V, independently switchable per channel.
Latency: Under 1 ms.
Analog & Digital I/O
Mic Inputs: 8 x XLR on rear panel.
Line Inputs: 8 x TRS on rear panel.
Instrument Inputs: 2 x Front-panel Hi-Z jacks.
Analog Outputs: 10 x TRS (8 line + 2 monitor).
Headphone Outputs: 2 x Independent Front-panel 1/4″ jacks.
Digital I/O: 16 channels ADAT I/O (at 44.1/48 kHz), 8 channels (at 88.2/96 kHz).
S/PDIF: Coaxial (RCA) I/O.
Clock: Word Clock I/O (BNC).
MIDI: In / Out.
Hardware & Controls
Form Factor: 2U Rackmount.
Controls: Independent gain, 48V, HPF, and phase reverse for every channel.
Monitoring: 6-segment LED meters for all 8 inputs and main monitor outputs.
Monitor Control: Large main monitor knob with DIM and MUTE switches.
AUDIO-TECHNICA ATW-R3100b • True Diversity UHF Wireless Receiver (Pair)
Pre-owned
£250.00
The Audio-Technica ATW-R3100b is a frequency-agile, true diversity UHF wireless receiver featuring 1,001 selectable frequencies (996 in Bands C and D, 1001 in Band I) with 25 kHz spacing for reliable operation in crowded RF environments. It offers a typical operating range of 100 meters (300 feet) and a frequency response of 70 Hz to 15 kHz with a dynamic range exceeding 110 dB.
The system utilizes Digital Tone Lock™ squelch to prevent interference from other transmitters and includes features like automatic frequency scanning, adjustable receiver squelch, and a ground lift switch to eliminate hum.
Key technical specifications include:
Receiving System: True Diversity with silent, automatic switching between two independent tuner sections.
Audio Outputs: Balanced XLR-type (+9 dBV) and unbalanced 1/4″ TS (+7 dBV) jacks.
Sensitivity: 24 dBuV at 60 dB S/N ratio (50 ohms termination).
Image Rejection: 60 dB nominal, 55 dB minimum.
Antenna Inputs: Dual BNC-type (50 ohms) with switchable 12V DC, 60 mA bias voltage for powered antennas.
Power Requirements: 12–18V DC at 500 mA or AC adapter.
Dimensions: 210.0 x 164.4 x 44.0 mm (8.27″ x 6.47″ x 1.73″), fitting a single 1U rack space.
Weight: 1.1 kg (2.4 lbs).
