DOD PHASOR • Rare vintage 1970s phaser pedal
Pre-owned
£120.00
Key Specs:
Type: Analog Phase Shifter.
Circuitry: Generally 2-stage (201) or 4-stage (401) design.
Controls: Single “Speed” knob (some models/reissues also allow for internal trim adjustments).
Power: Typically 9V battery or 9VDC adapter (Centre positive).
Input/Output: 1/4″ mono instrument jacks.
Chassis: “Big Box” aluminum casing, often gray or black in the earliest models.
Key Features:
Warmth: Known for a subtle, musical modulation rather than an over-the-top effect.
Vintage Flavor: A staple of early 1970s analog design, often considered a rival to MXR Phase pedals of the era.
Durability: Solid, heavy-duty construction designed for rugged, live use.
DEMON fx • King Of Drive
Pre-owned
£45.00
The DemonFX King of Drive is a dual-mode overdrive/distortion pedal based on the Analogman King of Tone circuit, featuring hand-wired construction and true bypass. It offers three selectable modes per channel—Clean, Overdrive (OD), and Distortion—configured via a 4-position DIP switch located inside the pedal casing.
Key specifications include:
Voltage: 9V DC, negative center tip.
Current Draw: 30 milliamps (though some listings suggest a 300mA adapter for stability).
Controls: External knobs for gain, volume, and tone, plus internal treble pots and a high-gain switch for each channel.
Modes:
OD Mode: Standard King of Tone sound with slightly less drive than a Tube Screamer; can be set to be 4x louder than a Tube Screamer.
Clean Mode: A cross between a clean boost and overdrive with less compression; can be set to be 2x louder than OD mode.
Distortion Mode: Harder distortion with more compression; can be set to be almost 2x louder than a Tube Screamer.
Factory DIP Setting: Left channel (Yellow) set to Clean, Right channel (Red) set to OD.
Ernie Ball P06180 VP Jr. Volume Pedal 250K •
Pre-owned
£65.00
The Ernie Ball P06180 VP Junior features a micro taper switch which provides the user two distinct volume swell rates. This can be found behind the jack area under the footplate.
The main pivot shaft is of centerless ground 1/2′ diameter stainless steel, precision seated though nylon bushings at both ends. Tough long lasting Kevlar cable transmits pedal travel to the controls and is attached by stainless steel springs.
The Ernie Ball P06180 VP Jr 250K Volume Pedal Main features Include:
* 250k ohm resistance
* For the audio path of passive instruments
* Micro taper switch
* Main pivot shaft is of centerless ground 1/2′ diameter stainless steel
* Precision seated though nylon bushings at both ends
* Tough long lasting Kevlar circuitry
* Dimensions (WxLxH): 3.5″ x 10″ x 2 3/8″
MXR • DYNACOMP
Pre-owned
£69.00
The original model, featuring controls for Sensitivity (compression ratio) and Output (volume).
Bypass: True Bypass (Hardwire)
Power: 9V battery or AC adapter (ECB003)
Current Draw: 3.3 mA
Max Compression: 36 dB
Attack/Release: ~5 ms attack, ~1 s release
Dimensions: 6.4 cm (W) x 3.2 cm (H) x 11.5 cm (D)
Weight: 0.38 kg
JOYO VINTAGE OVERDRIVE
Pre-owned
£25.00
The Joyo JF-01 Vintage Overdrive is a budget-friendly clone of the classic Ibanez TS808 Tube Screamer, featuring an aluminum alloy enclosure with a stoving varnish finish.
It utilizes the JRC4588 (or RC4558) op-amp chip to deliver a warm, smooth overdrive tone with a characteristic mid-range focus.
Technical Specifications
Controls: Volume (output), Drive (gain), and Tone (treble boost/cut, focused around 2-5kHz).
Bypass: True bypass design to minimize tone loss.
Power: 9V DC adapter (center negative) or 6F22 9V battery.
Current Draw: 7mA.
Impedance: 500KΩ input, 10KΩ output.
Dimensions: 120mm (L) x 72mm (W) x 55mm (H).
Weight: Approximately 280g (9.9 oz).
Signal Format: Analog.
Casing: Aluminum alloy with stoving varnish finish.
PALMER POCKET AMP MK2
Pre-owned
£65.00
The Palmer Pocket Amp MK 2 (Model: PEPAMP MK II) is a portable, solid-state guitar preamp and DI box designed for direct recording, practice, and live performance. It features authentic tube amplifier simulations and speaker cabinet emulation in a compact, die-cast aluminum enclosure.
Key Features
Amp Simulations: Three selectable amplifier designs (Vintage Tweed, Modern British, and USA-style).
Modes: Each amp has three channels: Clean, Crunch, and Heavy (High Gain).
Mic Simulation: Three microphone positioning modes to alter tone:
Classic: Clear sound with balanced mids.
Centre: Emulates an SM57, adding high-mids and treble.
Off-Axis: Reduces harshness for a smoother, mid-forward tone.
Connectivity:
Input: 1x 6.35 mm Jack (1 MΩ impedance).
Outputs: Balanced XLR (DI), 6.35 mm Jack (Unbalanced), and 3.5 mm Headphone Jack.
Aux Input: 3.5 mm stereo input for connecting MP3/CD players for practice.
Controls: Gain, Drive, Level (Volume), Bass, Treble, Amp Select, Mode, Mic Position, and Ground Lift switch.
Power: 9V DC block or optional 9V DC power adapter (30mA).
Technical Specifications
Technology: Solid State (Pure Analogue)
Cabinet Material: Die-cast Aluminum
Dimensions: 98 x 54 x 98 mm (approx. 100 x 55 x 100 mm)
Weight: 360 g – 370 g
Output Impedance: 510 Ω
Input Impedance: 1 MΩ
M-VAVE MINI UNIVERSE • DIGITAL REVERB
Pre-owned
£45.00
Specifications
Model Number: MINI-UNIVERSE
Effect Type: Digital Reverb
Number of Reverb Effects: 9
Room, Hall, Plate, Spring, Shimmer, Cloud, Bloom, Swell, Lofi
Signal Format: Digital (with analog signal path)
Bypass Type: True Bypass (minimizes tone loss when disengaged)
Construction: High-grade metal enclosure for durability.
Dimensions: 112mm x 68mm x 40mm (4.4″ x 2.68″ x 1.57″)
Approx. 5″ x 3″ x 2″
ELECTRO-HARMONIX • LPB-1 LINEAR POWER BOOSTER
Pre-owned
£55.00
The Electro-Harmonix Nano LPB-1 Power Booster is a reissue of the original LPB-1 that introduced overdrive in 1968.
Put this in line before any effect to provide boost and definition and improve the gain, saturation and presence of your amp.
Housed in a compact, die-cast box with rounded corners to save valuable pedalboard space.
Fender Channel Select/Effects 2 Button Amplifier Footswitch
Pre-owned
£45.00
QUAD 306 POWER AMPLIFIER
Pre-owned
£260.00
NB: Postage to UK only.
Can be viewed and tried at our premises.
Questions welcome.
Lots of other cool items for sale, come and visit!
Key Technical Specifications
* Power Output: 50 Watts per channel into 8
Total Harmonic Distortion:
* 0.01% (at 100Hz–10kHz at 50W).
* Frequency Response: -0.25dB at 20Hz and 20kHz, 13Hz to 40kHz (-1dB).
* Input Sensitivity: 375mV.
* Signal to Noise Ratio: -105dB (unweighted).
* Crosstalk: 85dB at 1kHz.
* Input Impedance: 20k
* Dimensions: 321(W) x 64(H) x 207(D) mm.
* Weight: 4.62 kg.
* Stability: Unconditionally stable with any load and any signal.
Features
* Output Circuit: Patented Current Dumping.
* Inputs: RCA Phono Sockets.
* Outputs: 4mm Banana Sockets.
* Protection: Resettable thermal trip (push button on back).
* Construction: Front-mounted heatsink, often paired with the Quad 34 or 44 pre-amplifier.
BOSS ME-70
Multi-FX
Pre-owned
£140.00
Dedicated knobs for each parameter for fast, friendly operation •
New COSM Preamp section derived from GT-10 & Legend series •
EZ TONE for quick, easy editing •
Four footswitches and Expression pedal •
PHRASE LOOP function in DELAY section, with 38 seconds of recording time •
Battery or AC (optional PSA-120s) operation •
BOSS ME-90
Multi-FX
Pre-owned
£260.00
Specifications:
Amp Models: 11 onboard AIRD models + cab simulation.
Effects: 60+ distinct types, including OD/DS, Mod, Delay, and Reverb.
Signal Chain: 7 simultaneous effect categories.
Memory: 36 Preset + 36 User patches.
IR Loader: Support for 3 custom Speaker IRs.
Audio Processing: 32-bit AD/DA conversion, 32-bit floating point processing, 48kHz sampling rate.
Hardware & Interface:
Controls: 8 multi-function footswitches + expression pedal.
Interface: Knobs for every parameter (knob-per-function).
Display: 7-segment 2-character LED.
USB: USB-C to BOSS Tone Studio and computer interfacing.
Bluetooth: Optional BT-Dual Adaptor allowed for streaming/editing.
Connectivity:
Input: 1/4-inch input.
Output: L/Mono + R 1/4-inch outputs.
Phones: 3.5 mm stereo jack.
Loop: 1/4-inch send/return jack.
Power: 4 x AA batteries or AC adaptor (PSA-series, not included).
Battery Life: Approximately 6.5 hours (alkaline).
DUNLOP • CRY BABY WAH-WAH PEDAL
Pre-owned
£65.00
The Legend!
LINE 6 • GUITAR PORT
USB Interface
£29.00
Pre-owned
Vintage USB Interface: Connects your guitar to PC/Mac via USB •
Provides digital modeling of classic amps (like Fender, Mesa Boogie) and cabinets, plus stompbox effects •
Integrated player for MP3/CDs, allowing pitch-independent slowing, looping, and hum reduction •
BEHRINGER • UC200 • ULTRA CHORUS
Pre-owned
£20.00
- Controls: Dedicated knobs for Level, Tone, Rate, and Depth for precise sound sculpting.
- Bypass: Electronic on/off switch maintains signal integrity when bypassed (True Bypass).
- LED Indicator: Shows effect status and battery level.
- Power: 9V battery or optional PSU-SB power supply (sold separately).
VOX • ToneLab ST • Amp Modeller
Pre-owned
£100.00
ToneLab ST
The ToneLab ST is a compact unit with an expanded library of 33 amp models and 11 cabinet types.
It offers 100 program memories (50 preset, 50 user) and 24-bit signal processing.
It connects via USB for audio interface and software editing, unlike the MIDI/S/PDIF focus of the LE/SE.
It includes 11 pedal effects, 11 modulation, and 3 reverb types.
Dimensions are 270 x 180 x 70 mm and it weighs 1.6 kg.
BOSS BCB-6 • EFFECTS PEDAL BOARD/ CASE
Pre-owned
£75.00
